Stabilised Chlorine Granules
Our premium stabilised chlorine granules are ideal for daily dosing of your swimming pool, swimspa or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on pH.
Application Instructions
1. Maintain pH levels within the ideal range 7.0 - 7.6. If the level is outside of this range, you will need to adjust.
2. Maintain free chlorine residuals within the range. Pools: 1 - 3mg/l (ppm); Spas: 3 - 5 mg/l (ppm).
3. This product may be applied directly to pools and spas where temperatures exceed 20ºC. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10l) of water. Stir well to ensure the product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
4. Repeat dose application if necessary to achieve levels in point 2 above.
5. To eliminate any excess contamination. It is recommended that you periodically (e.g. weekly/fortnightly) shock treat your spa or swimspa water, using our shock or oxidiser products,
* New and freshly filled spas require initial shock or start up dose of 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours. Use our shock chloride for this
Available in 1kg or 5kg.